skip to main text

Printing on Postcards

This section describes the procedure for postcard printing.

  1. Load postcard on the printer

  2. Open the printer driver setup window

  3. Select commonly used settings

    Display the Quick Setup tab, and for Commonly Used Settings, select Standard.

  4. Select the media type

    For Media Type, select Hagaki A, Ink Jet Hagaki, or Hagaki.

    Important

  5. Select the paper size

    For Printer Paper Size, select Hagaki 100x148mm or Hagaki 2 200x148mm.

    Important

    • Return postcards can be used only when you print them from the computer.
    • When printing a return postcard, always set the paper size to Hagaki 2 200x148mm from your application software or the printer driver.
    • Do not fold the return postcard. If a crease is formed, the printer will not be able to feed the postcard properly, and this condition will cause line shifts or a paper jam.
    • With return postcards, borderless printing cannot be used.
  6. Set the print orientation

    To print the address horizontally, set Orientation to Landscape.

  7. Select the print quality

    For Print Quality, select High or Standard, according to your purpose.

  8. Complete the setup

    Click OK.
    When you execute printing, the data will be printed onto the postcard.

Important

  • When you execute postcard printing, a guide message is displayed.
    When the guide message is displayed, select Do not show this message again if you do not want any guide messages to be displayed.
    To display guide messages again, open the Maintenance tab and click View Printer Status to start the Canon IJ Status Monitor.
    On the Option menu, choose Display Guide Message and click Hagaki Printing to enable the setting.
  • When printing on media other than postcards, load the media according to usage method of that media, and click Start Printing.